Edge Detection

Overview

Teaching: 20 min
Exercises: 45 min
Questions
  • How can we automatically detect the edges of the objects in an image?

Objectives
  • Apply Canny edge detection to an image.

  • Explain how we can use sliders to expedite finding appropriate parameter values for our skimage function calls.

  • Create skimage windows with sliders and associated callback functions.

In this episode, we will learn how to use skimage functions to apply edge detection to an image. In edge detection, we find the boundaries or edges of objects in an image, by determining where the brightness of the image changes dramatically. Edge detection can be used to extract the structure of objects in an image. If we are interested in the number, size, shape, or relative location of objects in an image, edge detection allows us to focus on the parts of the image most helpful, while ignoring parts of the image that will not help us.

For example, once we have found the edges of the objects in the image (or once we have converted the image to binary using thresholding), we can use that information to find the image contours, which we will learn about in the following connected components episode. With the contours, we can do things like counting the number of objects in the image, measure the size of the objects, classify the shapes of the objects, and so on.

As was the case for blurring and thresholding, there are several different methods in skimage that can be used for edge detection, so we will examine only one in detail.

Introduction to edge detection

To begin our introduction to edge detection, let us look at an image with a very simple edge – this grayscale image of two overlapped pieces of paper, one black and and one white:

Black and white image

The obvious edge in the image is the vertical line between the black paper and the white paper. To our eyes, there is a quite sudden change between the black pixels and the white pixels. But, at a pixel-by-pixel level, is the transition really that sudden?

If we zoom in on the edge more closely, as in this image, we can see that the edge between the black and white areas of the image is not a clear-cut line.

Black and white edge pixels

We can learn more about the edge by examining the color values of some of the pixels. Imagine a short line segment, halfway down the image and straddling the edge between the black and white paper. This plot shows the pixel values (between 0 and 255, since this is a grayscale image) for forty pixels spanning the transition from black to white.

Gradient near transition

It is obvious that the “edge” here is not so sudden! So, any skimage method to detect edges in an image must be able to decide where the edge is, and place appropriately-colored pixels in that location.

Canny edge detection

Our edge detection method in this workshop is Canny edge detection, created by John Canny in 1986. This method uses a series of steps, some incorporating other types of edge detection. The skimage skimage.feature.canny() function performs the following steps:

  1. A Gaussian blur (that is characterized by the sigma parameter, see introduction) is applied to remove noise from the image. (So if we are doing edge detection via this function, we should not perform our own blurring step.)
  2. Sobel edge detection is performed on both the x and y dimensions, to find the intensity gradients of the edges in the image. Sobel edge detection computes the derivative of a curve fitting the gradient between light and dark areas in an image, and then finds the peak of the derivative, which is interpreted as the location of an edge pixel.
  3. Pixels that would be highlighted, but seem too far from any edge, are removed. This is called non-maximum suppression, and the result is edge lines that are thinner than those produced by other methods.
  4. A double threshold is applied to determine potential edges. Here extraneous pixels caused by noise or milder color variation than desired are eliminated. If a pixel’s gradient value – based on the Sobel differential – is above the high threshold value, it is considered a strong candidate for an edge. If the gradient is below the low threshold value, it is turned off. If the gradient is in between, the pixel is considered a weak candidate for an edge pixel.
  5. Final detection of edges is performed using hysteresis. Here, weak candidate pixels are examined, and if they are connected to strong candidate pixels, they are considered to be edge pixels; the remaining, non-connected weak candidates are turned off.

For a user of the skimage.feature.canny() edge detection function, there are three important parameters to pass in: sigma for the Gaussian filter in step one and the low and high threshold values used in step four of the process. These values generally are determined empirically, based on the contents of the image(s) to be processed.

The following program illustrates how the skimage.feature.canny() method can be used to detect the edges in an image. We will execute the program on this image, which we used before in the Thresholding episode:

Colored shapes

We are interested in finding the edges of the shapes in the image, and so the colors are not important. Our strategy will be to read the image as grayscale, and then apply Canny edge detection. Note that when reading the image with skimage.io.imread(..., as_gray=True) the image is converted to a float64 grayscale with the original dtype range being mapped to values ranging from 0.0 to 1.0.

This program takes three command-line arguments: the filename of the image to process, and then two arguments related to the double thresholding in step four of the Canny edge detection process. These are the low and high threshold values for that step. After the required libraries are imported, the program reads the command-line arguments and saves them in their respective variables.

"""
 * Python script to demonstrate Canny edge detection.
 *
 * usage: python CannyEdge.py <filename> <sigma> <low_threshold> <high_threshold>
"""
import skimage
import skimage.feature
import skimage.viewer
import sys

# read command-line arguments
filename = sys.argv[1]
sigma = float(sys.argv[2])
low_threshold = float(sys.argv[3])
high_threshold = float(sys.argv[4])

Next, the original images is read, in grayscale, and displayed.

# load and display original image as grayscale
image = skimage.io.imread(fname=filename, as_gray=True)
viewer = skimage.viewer(image=image)
viewer.show()

Then, we apply Canny edge detection with this function call:

edges = skimage.feature.canny(
    image=image,
    sigma=sigma,
    low_threshold=low_threshold,
    high_threshold=high_threshold,
)

As we are using it here, the skimage.feature.canny() function takes four parameters. The first parameter is the input image. The sigma parameter determines the amount of Gaussian smoothing that is applied to the image. The next two parameters are the low and high threshold values for the fourth step of the process.

The result of this call is a binary image. In the image, the edges detected by the process are white, while everything else is black.

Finally, the program displays the edges image, showing the edges that were found in the original.

# display edges
viewer = skimage.viewer.ImageViewer(edges)
viewer.show()

Here is the result, for the colored shape image above, with sigma value 2.0, low threshold value 0.1 and high threshold value 0.3:

Output file of Canny edge detection

Note that the edge output shown in an skimage window may look significantly worse than the image would look if it were saved to a file due to resampling artefacts in the interactive image viewer. The image above is the edges of the junk image, saved in a PNG file. Here is how the same image looks when displayed in an skimage output window:

Output window of Canny edge detection

Interacting with the image viewer using viewer plugins

As we have seen, for a user of the skimage.feature.canny() edge detection function, three important parameters to pass in are sigma, and the low and high threshold values used in step four of the process. These values generally are determined empirically, based on the contents of the image(s) to be processed.

Here is an image of some glass beads that we can use as input into a Canny edge detection program:

Beads image

We could use the CannyEdge.py program above to find edges in this image. To find acceptable values for the thresholds, we would have to run the program over and over again, trying different threshold values and examining the resulting image, until we find a combination of parameters that works best for the image.

Or, we can write a Python program and create a viewer plugin that uses skimage sliders, that allow us to vary the function parameters while the program is running. In other words, we can write a program that presents us with a window like this:

Canny UI

Then, when we run the program, we can use the sliders to vary the values of the sigma and threshold parameters until we are satisfied with the results. After we have determined suitable values, we can use the simpler program to utilize the parameters without bothering with the user interface and sliders.

Here is a Python program that shows how to apply Canny edge detection, and how to add sliders to the user interface. There are four parts to this program, making it a bit (but only a bit) more complicated than the programs we have looked at so far. The added complexity comes from setting up the sliders for the parameters that were previously read from the command line: In particular, we have added

We will look at the main program part first, and then return to writing the plugin. The first several lines of the main program are easily recognizable at this point: saving the command-line argument, reading the image in grayscale, and creating a window.

"""
 * Python script to demonstrate Canny edge detection
 * with sliders to adjust the thresholds.
 *
 * usage: python CannyTrack.py <filename>
"""
import skimage
import skimage.feature
import skimage.viewer
import sys


filename = sys.argv[1]
image = skimage.io.imread(fname=filename, as_gray=True)
viewer = skimage.viewer.ImageViewer(image)

The skimage.viewer.plugins.Plugin class is designed to manipulate images. It takes an image_filter argument in the constructor that should be a function. This function should produce a new image as an output, given an image as the first argument, which then will be automatically displayed in the image viewer.

# Create the plugin and give it a name
canny_plugin = skimage.viewer.plugins.Plugin(image_filter=skimage.feature.canny)
canny_plugin.name = "Canny Filter Plugin"

We want to interactively modify the parameters of the filter function interactively. Skimage allows us to further enrich the plugin by adding widgets, like skimage.viewer.widgets.Slider, skimage.viewer.widgets.CheckBox, skimage.viewer.widgets.ComboBox. Whenever a widget belonging to the plugin is updated, the filter function is called with the updated parameters. This function is also called a callback function. The following code adds sliders for sigma, low_threshold and high_thresholds.

# Add sliders for the parameters
canny_plugin += skimage.viewer.widgets.Slider(
    name="sigma", low=0.0, high=7.0, value=2.0
)
canny_plugin += skimage.viewer.widgets.Slider(
    name="low_threshold", low=0.0, high=1.0, value=0.1
)
canny_plugin += skimage.viewer.widgets.Slider(
    name="high_threshold", low=0.0, high=1.0, value=0.2
)

A slider is a widget that lets you choose a number by dragging a handle along a line. On the left side of the line, we have the lowest value, on the right side the highest value that can be chosen. The range of values in between is distributed equally along this line. All three sliders are constructed in the same way: The first argument is the name of the parameter that is tweaked by the slider. With the arguments low, and high, we supply the limits for the range of numbers that is represented by the slider. The value argument specifies the initial value of that parameter, so where the handle is located when the plugin is started. Adding the slider to the plugin makes the values available as parameters to the filter_function.

How does the plugin know how to call the filter function with the parameters?

The filter function will be called with the slider parameters according to their names as keyword arguments. So it is very important to name the sliders appropriately.

Finally, we add the plugin the viewer and display the resulting user interface:

# add the plugin to the viewer and show the window
viewer += canny_plugin
viewer.show()

Here is the result of running the preceding program on the beads image, with a sigma value 1.0, low threshold value 0.1 and high threshold value 0.3. The image shows the edges in an output file.

Beads edges (file)

Applying Canny edge detection to another image (5 min)

Now, navigate to the Desktop/workshops/image-processing/08-edge-detection directory, and run the CannyTrack.py program on the image of colored shapes, junk.jpg. Use a sigma of 1.0 and adjust low and high threshold sliders to produce an edge image that looks like this:

Colored shape edges

What values for the low and high threshold values did you use to produce an image similar to the one above?

Solution

The colored shape edge image above was produced with a low threshold value of 0.05 and a high threshold value of 0.07. You may be able to achieve similar results with other threshold values.

Using sliders for thresholding (30 min)

Now, let us apply what we know about creating sliders to another, similar situation. Consider this image of a collection of maize seedlings, and suppose we wish to use simple fixed-level thresholding to mask out everything that is not part of one of the plants.

Maize roots image

To perform the thresholding, we could first create a histogram, then examine it, and select an appropriate threshold value. Here, however, let us create an application with a slider to set the threshold value. Create a program that reads in the image, displays it in a window with a slider, and allows the slider value to vary the threshold value used. You will find the image in the Desktop/workshops/image-processing/08-edge-detection directory, under the name maize-roots.jpg.

Solution

Here is a program that uses a slider to vary the threshold value used in a simple, fixed-level thresholding process.

"""
 * Python program to use a slider to control fixed-level
 * thresholding value.
 *
 * usage: python interactive_thresholding.py <filename>
"""

import skimage
import skimage.viewer
import sys

filename = sys.argv[1]


def filter_function(image, sigma, threshold):
    masked = image.copy()
    masked[skimage.filters.gaussian(image, sigma=sigma) <= threshold] = 0
    return masked


smooth_threshold_plugin = skimage.viewer.plugins.Plugin(
    image_filter=filter_function
)

smooth_threshold_plugin.name = "Smooth and Threshold Plugin"

smooth_threshold_plugin += skimage.viewer.widgets.Slider(
    "sigma", low=0.0, high=7.0, value=1.0
)
smooth_threshold_plugin += skimage.viewer.widgets.Slider(
    "threshold", low=0.0, high=1.0, value=0.5
)

image = skimage.io.imread(fname=filename, as_gray=True)

viewer = skimage.viewer.ImageViewer(image=image)
viewer += smooth_threshold_plugin
viewer.show()

Here is the output of the program, blurring with a sigma of 1.5 and a threshold value of 0.45:

Thresholded maize roots

Keep this plugin technique in your image processing “toolbox.” You can use sliders (or other interactive elements, see the skimage documentation) to vary other kinds of parameters, such as sigma for blurring, binary thresholding values, and so on. A few minutes developing a program to tweak parameters like this can save you the hassle of repeatedly running a program from the command line with different parameter values. Furthermore, skimage already comes with a few viewer plugins that you can check out in the documentation.

Other edge detection functions

As with blurring, there are other options for finding edges in skimage. These include skimage.filters.sobel(), which you will recognize as part of the Canny method. Another choice is skimage.filters.laplace().

Key Points

  • The skimage.viewer.ImageViewer is extended using a skimage.viewer.plugins.Plugin.

  • We supply a filter function callback when creating a Plugin.

  • Parameters of the callback function are manipulated interactively by creating sliders with the skimage.viewer.widgets.slider() function and adding them to the plugin.